Are you a native speaker? Would you be willing to help us?
We are very appreciative of translations, proofreading or pictures/screenshots to help optimize our installation guide. Or any other advice.
Please don't hesitate to write us an email: info@scdb.info. Thanks in advance.
Your navigation device is based on iGO software from the manufacturer NNG. In some iGO versions, the manufacturer blocks the display of speed camera data in certain countries. This may include Switzerland, France, and border regions.
WE ARE LOOKING FOR TESTERS
So far, we have not known a solution to install speed camera data in the iGO nextGen version. You can recognize this version by the application file icon: However, there might be a way to install speed camera data. Please write to us if you have a device with iGO nextGen.
With map and software updates, the speed camera warning function may be lost. Therefore, carefully consider whether you really need the update. Reverting to the previous version is no longer possible afterward.
Please always try it out with our free test file before purchasing.
The free sample file for Europe allows you to test if POIs can be installed on your navigation device.
Install sample file according to this installation guide.
The sample file has data from 2014. It does not cover all speed cameras. Do not use it for a safe trip!
Download sample file
Try before purchase. Refund excluded after download started of full database.
Go to our productpage for ZENEC.
We offer only data of fixed speed cameras.
Click button Download.
ZENEC devices are based on iGO navigation software. But the installation procedure may be different.
Try one of these two methods:
Choose Installation method 1 if the navigation software is stored on SD card.
This method should be suitable for most devices.
Choose Installation method 2 if the navigation software is not stored on SD card.
In this case you may have to use the synctool from naviextras.com to prepare an USB flash drive or SD card. The need depends on the device.
e.g. for
ZENEC Z-E 2026
ZENEC Z-E 3726
ZENEC Z-E 3766
ZENEC Z-E 3776
ZENEC Z-N 626
ZENEC Z-N 720
ZENEC Z-N 956
ZENEC ZE-NC 2011D
Remove the SD card from the ZENEC device.
Connect the SD card to the computer.
Open Windows Explorer (Mac: Finder).
Go to SD card directory ... > content > speedcam.
Delete all files inside of the folder speedcam.
Copy and paste the unzipped file Speedcam.txt into the folder speedcam.
Note: Create folder speedcam by yourself if it doesn't exist.
Safely remove the SD card from the computer.
Connect the SD card to the ZENEC device.
Power on the ignition.
The boot process may now take a little longer, as the speed camera data is imported into the software.
Remove the SD card from the ZENEC device.
Connect again the SD card to the computer.
Open the directory ... > content > speedcam.
Now there should be 3 files inside:
Speedcam.txt
speedcam.spdb
SpeedcamUpdates.spud
Safely remove the SD card from the computer.
Connect the SD card to the ZENEC device.
Make sure that the device gets a real GPS signal.
Your vehicle should be outdoors. Probably, you will not find real GPS signal if your vehicle is in the garage.
Check all preferences in the device to enabling speed camera alerts.
Go to Settings > Sound and Warning > Alerts > Alert Point Settings (Einstellungen > Audio & Warnungen > Warnpunkte > Warnung bei Warnpunkten).
Do you have some pictures for us? (in your language)
Would you like to improve our translations? We are very appreciative of your help. Please help us optimize our installation guide.
Don't hesitate to send us an email any time: info@scdb.info. Thanks in advance.
Note 1: The wording of the menu may be different (depending on installed software version).
In most cases real GPS signal is required to find the menu for enable warnings.
Note 2: The category for mobile speedcams is not supported by our database. You can only download fixed speedcams from our website.
Note 3: The iGO software manages all acoustic and visual alerts. We have no influence on acoustic or visual alerts. Our database is just a POI file.
In most devices you have to choose a TTS speech for acoustic alerts. TTS speeches tells you street names and other notifications.
Note 4: Your navigation device is based on iGO software from the manufacturer NNG. In some versions of iGO, the manufacturer blocks the display of speed camera data in individual countries. This can be Switzerland, France and border regions.
Look for speed cameras on the map. And take a real test drive.
Note: It will not work if you are only simulating a route.
e.g. for
ZENEC Z-E2050
ZENEC ZE-NC5011D
Visit naviextras.com website.
Download synctool for your ZENEC device (alternative download: here).
Save the file synctool_download.exe on your hard disc.
Connect the USB flash drive to the ZENEC device.
The device starts up with a menu of naviextras.com (synctool).
Click Prepare USB for Update. In this step device informations are collected on the USB flash drive.
This step may takes some minutes (nearly 50 minutes if you have mas for Europe).
Click Quit to finish the synctol.
Remove the USB flash drive from the ZENEC device.
Connect the USB flash drive to the computer.
Safely remove the USB flash drive from the computer.
Connect the USB flash drive to the ZENEC device.
Remove the USB flash drive from the ZENEC device.
Enable speed camera warnings in the device settings.
Go to More... > Settings > Sound and Warning > Alert Point Settings (Mehr... > Einstellungen > Audio & Warnungen > Radarwarnungen).
Do you have some pictures for us? (in your language)
Would you like to improve our translations? We are very appreciative of your help. Please help us optimize our installation guide.
Don't hesitate to send us an email any time: info@scdb.info. Thanks in advance.
Note 1: The wording of the menu may be different (depending on installed software version).
In most cases real GPS signal is required to find the menu for enable warnings.
Note 2: The category for mobile speedcams is not supported by our database. You can only download fixed speedcams from our website.
Note 3: The iGO software manages all acoustic and visual alerts. We have no influence on acoustic or visual alerts. Our database is just a POI file.
In most devices you have to choose a TTS speech for acoustic alerts. TTS speeches tells you street names and other notifications.
Note 4: Your navigation device is based on iGO software from the manufacturer NNG. In some versions of iGO, the manufacturer blocks the display of speed camera data in individual countries. This can be Switzerland, France and border regions.
Look for speed cameras on the map. And take a real test drive.
Note: It will not work if you are only simulating a route.
Repeat all steps of the guide above to update speed cameras in your device.
Update with installation method 1
Copy the downloaded file Speedcam.txt into the folder speedcam (according to instructions above). Replace/overwrite the pre-existing file.
Update with installation method 2
Repeat all instruction as same as a new installation.
