Speed camera plug-in for Falk Navigator (for PDA's)

Installation Guide

Please note:

An acoustic warning is not possible with this overlay. For this purpose, please use our program SpeedLimit.
For an update of our plug-in, make sure that you first delete the old data!

Shut down your Falk Navigator.
Please unzip the overlay with a suitable program - we recommend WINZIP - in a target folder of your choice. In our example, we selected the folder "C:/temp/new folder".
In our example, we selected the folder "C:/temp/new folder".
Connect the PocketPC to your computer. Copy the resulting folder "TB-NAVI.ADDR" with all the files contained in it to your PocketPC into the folder "My Documents". If the folder "TB-NAVI.ADDR" already exists, please only copy the files into it.
Note: User of Falk Navigator 4 find the folder "TB-NAVI.ADDR" on the flashdisk. Please copy the data in this folder.
The PocketPC can be disconnected from the computer again. Now, start your Falk Navigator and in the menu "Settings/Map" select all high accident area overlays.

Note: The display of the high accident area icons is under the "zoom level" of 300m by default. However, you can change this. Read about this in the next chapter.

In order to change this setting, please open the file addr.ini in the installation folder (".../program files/Navigator 2004/addr.ini") in your PocketPC.
Copy this file to your PC and change the following values with an editor (e.g. Notepad):

scalesmall=200
scalelarge=100

in

scalesmall=2000
scalelarge=2000
For each category of high accident areas, these values must be changed.
After you have done it, save it in the file addr.ini.
Copy the same to the PDA in the output folder.